• Step 1. Inspect the rim carefully for possible cracks and serious damages.
  • Step 2. If the rim is deemed to be reparable, mount the rim on SR-2410 bender.
  • Step 3. Positively LOCK the rim with torque wrench before apply any force.
  • Step 4. Heat the aluminum rim before attempting to straighten it.
  • Step 5. Locate the dent area and bend spots on the rim.
  • Step 6. Select the desired Pull Hook.
  • Step 7. Adjust vertical ram position to the depth of the bending.


Rim straightning machine SR-2410
Wheel straightening machine


  • Step 8. Use dial indicator to check the roundness before any attempt to push or pull.
  • Step 9. Push the Ram Control Switch to pull / or push on the rim.
  • Step 10. Repeat the pull / or push on the rim to reach the required tolerance.
  • ​Step 11. Rotate the rim and work on the other side of the rim.
  • Step 12. Remove the rim from the bender and inspect the rim again fully.